We added this VDO Temp sensor to our range as it’s the perfect combo with our new adapter below and an oil pressure sender, because its shorter as our #2601 it don’t block the oil gallery in the adapter… for single use we still keep our BBT ref #2601 in our program. Comes with its washer.
2601-100 VDO oil temperature sensor with seal 180°C – 6-12volt – M13x1.5
This is the new adapter, carefully chosen for You… this adapter creates the perfect set up for your Oil temperature and pressure sensors on your VW Type 1 engines… as well as for many other applications… the hole for the temp sensor is larger to get a better feeling from the actual temperature, what’s an important improvement!
2600-100 Adapter for oil pressure and oil temperature sensor (M13x1.5)
This shims we added to our BBT program because we simply didn’t have 77mm diameter shims yet… this shims come between cylinder and engine case and are absolutely necessary to adjust your compression ratio. We got the shims in most common sizes…
3005-010 77,00mm cylinder shims .010 / set
3005-020 77,00mm cylinder shims .020 / set
3005-040 77,00mm cylinder shims .040 / set
3005-060 77,00mm cylinder shims .060 / set
Many cargo doors been dented and plied because of a too wide opening, this bracket in use with its correct strap prevent cargo doors for opening to wide, this is exactly like your splittie came from the factory!
0438-620 Door check strap bracket – Bus – 07/67
This rubber seals can be found between your car body and the wiper axle pivot on almost all Volkswagens made between 1958 and 1969 model year. Exactly like original ensures a perfect fit!
2424 Grommet wipershaft – Beetle 08/57-07/69, Bus 02/55-07/67
The BBT FPU team wish You a wonderful weekend!